“Hyrbrid” Microbial & Total Air Particulate Diffuser

Contact EMTEK to learn about our new High Pressure Diffuser (HPD) for sampling of compressed Air/Gas Systems for Microbial Contaminants with our P100, or V100/RCG Microbial Air Samplers and/or Total Particulates via Laser Particle Counter.  The new HPD is Electropolished 316SS & allows for HEPA filtration of the exhausted volume.  The unit can be autoclaved, or chemically sanitized for Microbial Testing of critical systems.  The filtered exhaust also greatly reduces the output decibel level of the HPD.  The HPD can be configured for testing at 28.3-50, or 75-100 LPM sample rates.

MICRO.HPD_.SS_.100

HPD Description

EMTEK Filtered Total Particulate/Microbial High Pressure Diffuser (HPD)

HPD Material / Finish

316 Stainless Steel / Electropolished

Equipment/Flow Compatibility

V100/RCG (50 & 100 LPM) , P100 (28.3 & 100 LPM) 1 CFM, 28.3, 50, 75 and 100 LPM Laser Particle Counter (LPC)

HPD Pressure Ranges (Approx)

V100/RCG, and LPC’s:
-1 CFM, 28.3, 50/15-18 to 125 PSI (1.3-8.6 bar) -75 or 100 LPM/18-21 to 125 PSI (1.5-8.6 bar)

P100 (with Compressed Gas Kit)
-28.3 LPM / 6-80 PSI (0.5-6.5 bar) -100 LPM / 26-110 PSI / 1.8 – 7.6 bar)

HPD Fittings/Adapters to drop

3/4“ Sanitary Fitting

HPD Exhaust Filters

Cartridge with 0.2micron Pleated HEPA Filters

HPD Fittings/Adapters tubing to LPC & P100 or RCG

0.375“/0.188“ OD (28.3/50 LPM for LPC’s) & 0.500“ OD (28.3/50 LPM for P100 or RCG), or 0.500“ OD (75/100 LPM)

HPD Dimensions

5.5“ Length*1.25“ OD

HPD Part/Order # for 28.3/50 LPM
75/100 LPM

EMTEK.HPD2.28.3/50.FIL T EMTEK.HPD2.75/100.FIL T

Leave a Reply

*